Quick and easy assembly with component accessibility from one side

Blind rivets

The blind rivet consists of a hollow rivet sleeve which is mounted on a metal mandrel. The processing of blind rivets is very easy because they are only set from one side. For this purpose, the rivet is inserted into a drilled or punched hole. The rivet mandrel is torn off at a predetermined breaking point by using a special tool. The rivet mandrel deforms the rivet sleeve on the back (blind side), creating a closing head. As soon as the parts to be riveted are connected, the mandrel breaks off at a defined point. With most blind rivets, the rivet mandrel head remains in the closing head after setting, but no longer fulfills any function in the connection.

Standard blind rivets, multi-purpose blind rivets, cup blind rivets, expanding blind rivets, press-tab blind rivets, high-strength rivets and heavy-duty blind rivets.

All common sizes, drives, materials and surfaces from a single source. Special sizes and shapes as screws according to drawings or samples – also from us.

Wherever materials have to be joined and/or a friction-locked thread is to be introduced: Mechanical engineering, automotive industry, electrical industry, telecommunications industry, construction industry, components, etc.

Materials
Aluminum, steel, stainless steel, A4 stainless steel, case-hardened and heat-treated steel, brass and other non-ferrous metals

Head shapes
Flat head, countersunk head, large flat head, extra large flat head

Dimensions
1mm – 100mm x 1000mm length

Documentations
The following are available on demand for initial sampling: Standard EMPB as cover sheet sampling; VDA Volume 2 Level 0-3; PPAP levels 1-3.

Scroll to Top